English

Silicon Nitride Ceramics

(Si₃N₄)

High-performance silicon nitride (Si₃N₄) engineering ceramics combine high strength, hardness, wear resistance and thermal stability with good chemical stability and resistance to thermal shock.

3.2 g/cm³ Typical Density
1,300°C Max Working Temperature
1,650 HV Vickers Hardness

Silicon nitride ceramic components

What Is Silicon Nitride Ceramic?

Silicon nitride (Si₃N₄) is an advanced non-oxide engineering ceramic known for its combination of mechanical strength, thermal performance and chemical stability.

Silicon nitride ceramics offer high strength at room and elevated temperatures, high hardness, abrasion resistance, oxidation resistance and resistance to thermal and mechanical shock.

With a low friction coefficient even at high temperatures and speeds, silicon nitride can serve as an alternative to nickel-base alloys in selected high-temperature and advanced engineering applications.

  • High hardness and abrasion resistance
  • High mechanical strength
  • Thermal and mechanical shock resistance
  • High-temperature performance
  • Oxidation and chemical stability
  • Low friction at high temperature and speed

Why Choose Silicon Nitride Ceramics?

Silicon nitride combines mechanical strength, wear resistance and thermal performance for demanding applications involving heat, friction and mechanical stress.

◆

High Hardness

Excellent hardness provides outstanding resistance to scratching, abrasion and surface damage.

◈

Wear Resistance

Excellent resistance to friction and mechanical wear helps extend component service life.

♨

Thermal Stability

Maintains structural integrity and mechanical performance in high-temperature environments.

ϟ

Chemical Stability

Oxidation resistance and chemical stability support use in demanding industrial environments.

◎

Chemical Resistance

Good chemical stability and oxidation resistance help silicon nitride perform in demanding service conditions.

⬡

Mechanical Strength

High compressive strength and stiffness support reliable performance in precision components.

Silicon Nitride Material Characteristics

The following characteristic groups summarize the mechanical, thermal and electrical data published for silicon nitride. Values are typical and should be confirmed for the selected component.

Mechanical Strength

High strength and hardness for components exposed to mechanical loads and abrasion.

  • Density3.2 g/cm³
  • Bending Strength750 MPa
  • Compressive Strength2,500 MPa
  • Elastic Modulus320 GPa
  • Vickers Hardness1,650 HV 0.5

Thermal Performance

Low thermal expansion and thermal shock resistance for demanding temperature conditions.

  • Thermal Expansion3.4 × 10⁻⁶ K⁻¹
  • Thermal Conductivity22 W/mK
  • Thermal Shock Resistance750 ΔT °C
  • Maximum Working Temperature1,300°C
  • Shock Strength6.7 MPa·m¹/²

Electrical Characteristics

Published electrical data include volume resistance and electrolyte strength.

  • Volume Resistance at 20°C>10¹¹ Ω·cm
  • Electrolyte Strength20 kV/mm
  • Dielectric ConstantNot specified
  • Dielectric Loss AngleNot specified
  • ColorGray / Black

Silicon Nitride Ceramic Products

Silicon nitride is used for specialized industrial components such as bearings, rollers, welding nozzles, fixtures, thermocouple sheaths and molten-metal handling parts.

Thermocouple Sheaths

Thermocouple Sheaths

Protective sheaths for thermocouple assemblies in high-temperature service.

Learn More →
Bearings & Rollers

Bearings & Rollers

Silicon nitride bearings and rollers for applications requiring hardness and wear resistance.

Learn More →
Welding Nozzles & Fixtures

Welding Nozzles & Fixtures

Welding nozzles, fixtures and weld location pins for industrial processes.

Learn More →
Crucibles & Wear Plates

Crucibles & Wear Plates

Components for molten-metal handling, including crucibles and wear plates.

Learn More →

Silicon Nitride Properties

Typical engineering properties of silicon nitride (Si₃N₄) as published by VANCERA.

Mechanical & Thermal Characteristics

Properties Unit Value Properties Unit / Value
Density g/cm³ 3.2 Bending Strength 750 MPa
Compressive Strength MPa 2,500 Elastic Modulus 320 GPa
Shock Strength MPa·m¹/² 6.7 Weber Coefficient 15 M
Vickers Hardness HV 0.5 1,650 Thermal Expansion Coefficient 3.4 × 10⁻⁶ K⁻¹
Thermal Conductivity W/mK 22 Thermal Shock Resistance Stability 750 ΔT °C
Maximum Working Temperature °C 1,300 Color Gray / Black

Electrical Characteristics

Properties Unit Value Properties Unit / Value
Volume Resistance at 20°C Ω·cm >10¹¹ Electrolyte Strength 20 kV/mm
Dielectric Constant εr Not specified Dielectric Loss Angle at 1 MHz / 20°C Not specified

Chemical & Environmental Characteristics

Characteristic Published Description
Chemical Stability Good chemical stability
Oxidation Resistance Oxidation resistant
Thermal / Mechanical Shock Good resistance

Note: Values are reproduced from VANCERA's published silicon nitride material data. The source describes the values as representative and notes that properties may vary with manufacturing method, component size and shape. Confirm the required specification before engineering use.

Applications of Silicon Nitride Ceramics

Silicon nitride components are used in high-temperature, wear-intensive and precision industrial applications.

Engineering and Structural Applications

Engineering & Structural

Crucibles and wear plates for handling molten metal.

Induction Heating Applications

Induction Heating

Supports for induction heating coils in high-temperature equipment.

Welding Equipment Applications

Welding Equipment

Welding nozzles, fixtures and weld location pins.

Dental Heat Treatment Applications

Dental Heat Treatment

Supports used in dental heat-treatment processes.

Electrical and Electronic Applications

Electrical & Electronic

Thermocouple sheaths for temperature measurement applications.

Cutting & Rotating Components Applications

Cutting & Rotating Components

Cutting tools, bearings and rollers.

Silicon Nitride Component Production

Component design, material selection and finishing requirements are matched to the intended operating conditions.

01

Material Selection

Select silicon nitride material to suit the component's operating conditions.

02

Component Forming

Form the ceramic blank to the required component geometry.

03

Sintering

Densify the ceramic through a controlled high-temperature process.

04

Precision Machining

Machine critical surfaces and dimensions to drawing requirements.

05

Quality Inspection

Check dimensions and relevant material characteristics.

Silicon Nitride Component Solutions

VANCERA supplies silicon nitride ceramic materials and components for demanding industrial applications.

01

Material Expertise

Silicon nitride properties selected according to the intended application.

02

Custom Manufacturing

Component geometries and dimensions can be specified to suit project requirements.

03

Precision Machining

Precision machining and finishing for ceramic components.

04

Quality Control

Inspection of material and dimensional requirements.

Frequently Asked Questions

Learn more about silicon nitride properties, applications and component selection.

Silicon nitride (Si₃N₄) is an advanced engineering ceramic with high mechanical strength, hardness, abrasion resistance, thermal performance and chemical stability.
Published typical properties include a density of 3.2 g/cm³, bending strength of 750 MPa, compressive strength of 2,500 MPa and Vickers hardness of 1,650 HV 0.5.
The published maximum working temperature is 1,300°C. Actual operating limits depend on component design, environment and service conditions.
The published thermal shock resistance stability is 750 ΔT °C. The suitability of a component should be evaluated against its actual heating and cooling cycle.
Typical applications include molten-metal handling parts, induction heating coil supports, welding nozzles and fixtures, dental heat-treatment supports, thermocouple sheaths, bearings, rollers, glow plugs and cutting tools.
Provide the component drawing, dimensions, tolerances, quantity and operating conditions, including temperature, load, contact material and environment, so the requirements can be reviewed.

 

Contact Us Now
Rm 8-16, Block 1, No. 6, Lane 165, Changyang East Road, Jiangbei District, Ningbo, 315033, China
VANCERA for Better Advanced Materials Solutions
Attentive communication ensures a full understanding of your Ceramics Engineering and Temperature Sensor requirements, while intelligent manufacturing delivers customized products with the best cost performance.
Contact Us
© 2026 VANCERA        SiteMap.html    SiteMap.xml    Terms of Service      Privacy Policy
Marketing Support by Globalsir
Fill and send us your inquiry and get reply within 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Message can't be empty
Verification code error
code
Clear